Demonstration: OA-10/ voltage travel time mounted
model control model
Supply voltage: K: 220VAC, F: 380VAC,
Travel time: Sees the table
Mounted model: Z: Direct-mounted, H: foot-plate,
Control model: L: Two types, switch, switch quantity input, abbreviation:
Integral-model and proportional modulating type, 4---20mA
S: Separated-model and proportional modulating type, 4---20mA
Y: Remote-control type, the switch quantity input
The main technical parameters of the electric actuator
The following technical parameters are mainly applied to the
proportional modulating type electric actuator.Item1, 2, 3, 4, 5and
6 are not suitable for the remote-control type electric actuator
and switch type electric actuator.
1.The input signal: 4--20mA DC
2.The input resistance: 250 ohm
4.Basic error:1%, 2.5%
6.Deadline: 0.5%--3% continuously adjustable
(according to the indication of system)
7.Damping characteristic: No-oscillating
8.power supply: three-phase 380V~50Hz, single-phase 220V~50Hz for selected
9.Working conditions: Temperature: Integral-type -10°C-- +55°C, separate-type
Humidity: ≤85%The surrounding air does not have the corrosive
10.Protection rank: it conforms to the IEC145 IP65 standards. (Excluding the
separate-type GAMX with waterproofing and dustproof functions fixed
in rooms), bus type and intelligent type IP67.
11.The cut-off signal protection: It can be divided into all-on, all-off and home position
according to your instructions.
Generally it is set into the home position when it is manufactured.
BELL series type
(with liquid crystal display)
0.4, 0.65, 1.0
0.4, 0.65, 1.0